home *** CD-ROM | disk | FTP | other *** search
/ Collection of Tools & Utilities / Collection of Tools and Utilities.iso / bbsutil / kbbs_40.zip / 202.KBB < prev    next >
Text File  |  1994-05-25  |  2KB  |  51 lines

  1. MAY 25, 1994
  2. KBBS Manual
  3. Running the Install Program
  4. KISSWARE WORKS!               Running the Install Program -- 202
  5.    K|eep
  6.    I|t                            KISSWARE BULLETIN BOARD SYSTEM
  7.    S|imple                            (c) 1991-1994 by Robert Zee
  8.    S|oftware                                  All Rights Reserved
  9. ─────────────────────────────────────────────────────────────────
  10.  
  11.                    Running the Install Program
  12.  
  13. If you received a distribution disk, all the files should be on a
  14. single floppy disk (3-1/2 or 5-1/4).  If you received a KBBS.ZIP
  15. file, you need to unzip the files first to a floppy disk. It is
  16. important that you have all the files in the same place on a
  17. floppy drive or in a directory of your hard disk drive.
  18.  
  19. From the DOS Prompt, change to the drive or directory by typing
  20. the DRIVE letter followed by a colon (i.e. "A:" or "B:" or "C:")
  21. and the directory if on drive C, then press enter.
  22.  
  23. Next type "INSTALL."  The install program does several things for
  24. you automatically:
  25.  
  26.         1.  Checks for missing or corrupted files.  Files that
  27.             shouldn't be on this floppy can cause the install
  28.             program to fail (minor attempt to eliminate virus
  29.             since it checks total size of files).
  30.  
  31.         2.  Makes the main directory "C:\KISSBBS" on your hard
  32.             drive plus several subdirectories which are needed.
  33.  
  34.         3.  Moves all files to the appropiate (sub)directories.
  35.  
  36. WARNING!    Do NOT use XCOPY or COPY command to copy files. If
  37.             you attempt to do this, files may not work at all!
  38.  
  39. After the install program makes the directories and files, it
  40. will automatically start the setup portion allowing you to setup
  41. your KBBS.
  42.  
  43. To get your SETUP to work you need to know about your modem and
  44. which port it is connected to.  Please check your system and
  45. modem manuals if you do not know.  This information is needed:
  46.  
  47.         1.  The COM PORT Number (i.e., 1, 2, 3, 4)
  48.  
  49.         2.  The FASTEST baud rate or speed of your modem.  Might
  50.             be 1200, 2400, 9600, 14,400 or speeds in between.
  51.